New Rheem Water Heater Pilot Light Keeps Going Out : Troubleshooting Tips & Fixes

The pilot light on a Rheem water heater frequently going out can be caused by a variety of issues.

Common Reasons For Pilot Light Going Out

New Rheem water heater pilot light going out can be a common issue that can disrupt your hot water supply. Understanding the common reasons for this problem is essential for troubleshooting and resolving the issue effectively. Let’s explore some common reasons for the pilot light going out.

Faulty Thermocouple

A faulty thermocouple is one of the main reasons for the pilot light going out in a new Rheem water heater. The thermocouple is a safety device that detects the presence of a flame and allows the gas to flow to the pilot light. If the thermocouple is faulty or malfunctioning, it may fail to detect the flame, causing the pilot light to go out. Replacing the faulty thermocouple with a new one can resolve this issue.

Gas Supply Issues

Gas supply issues can also lead to the pilot light going out in a new Rheem water heater. Insufficient gas pressure or a blockage in the gas supply line can hinder the proper functioning of the pilot light. Checking for gas leaks, ensuring proper gas pressure, and inspecting the gas supply line for any obstructions are essential steps to address gas supply issues causing the pilot light to go out.

Troubleshooting Steps

When your Rheem water heater pilot light keeps going out, troubleshooting the issue is essential to restore the functionality of your appliance. By following a series of steps, you can identify the cause of the problem and take appropriate action. In this section, we will go through two crucial troubleshooting steps that can help you resolve the issue: Checking Thermocouple Connection and Inspecting Gas Supply.

Checking Thermocouple Connection

A faulty thermocouple connection can cause the pilot light to go out. Here’s how you can check if the thermocouple is properly connected:

1. Locate the thermocouple on your Rheem water heater. It is usually located near the pilot light.
2. Inspect the thermocouple connection carefully to ensure it is securely fastened. If you notice any looseness, tighten the connection.
3. If the connection appears tight, you can try gently unscrewing and then reattaching the thermocouple to guarantee a secure connection.
4. Once you have checked and tightened the thermocouple connection, relight the pilot light and observe if it stays lit. If the pilot light goes out again, move on to the next troubleshooting step.

Inspecting Gas Supply

Insufficient gas supply is another potential cause for a pilot light going out on your Rheem water heater. Follow these steps to inspect the gas supply:

1. Ensure the gas valve on the water heater is fully open. If it’s partially closed, the pilot light might not receive enough gas. Turn the gas valve counterclockwise to open it fully.
2. Check for any obstruction or debris in the gas line. If you find any, carefully remove it.
3. If you have verified that the gas valve is open and there are no obstructions, you can try shutting off the gas supply to the water heater and then turning it back on. This can help reset the gas flow and potentially resolve the issue.
4. Lastly, make sure there are no air pockets in the gas line by bleeding the gas line according to the manufacturer’s instructions.

By carefully following these troubleshooting steps, you can diagnose and resolve the issue of your Rheem water heater’s pilot light repeatedly going out. If the problem persists, it is recommended to seek the assistance of a professional plumber or contact Rheem customer support for further guidance.

Fixes For Persistent Pilot Light Outages

Discover effective solutions for persistent pilot light outages with the new Rheem water heater. Experience hassle-free operation and uninterrupted hot water with our innovative technology. Say goodbye to pilot light frustrations and enjoy reliable performance every time.

Fixes for Persistent Pilot Light Outages Replacing the Thermocouple Adjusting Gas Pressure Persistent pilot light outages require specific fixes to ensure your Rheem water heater operates smoothly. Here are two crucial solutions to resolve this issue: Replacing the Thermocouple: – Turn off the gas supply. – Remove the access panel. – Locate the thermocouple. – Disconnect the thermocouple. – Install the new thermocouple. – Turn on the gas supply. Adjusting Gas Pressure: – Find the gas pressure regulator. – Use a wrench to adjust pressure. – Check for proper flame. – Verify stable flame. – Monitor pilot light. Remember, following these steps can rectify the consistent pilot light outages your Rheem water heater might be experiencing.

Maintenance Tips

Are you experiencing the frustrating issue of the pilot light on your new Rheem water heater frequently going out? Fear not, as regular maintenance can often resolve this issue. In this section, we’ll delve into some crucial maintenance tips to help ensure that your Rheem water heater’s pilot light remains consistently lit.

Cleaning The Pilot Orifice

Maintaining the pilot orifice is essential for the smooth operation of your Rheem water heater. Over time, the orifice can become obstructed by dirt, debris, or corrosion, leading to irregular gas flow and potential pilot light extinguishment.

To clean the pilot orifice:

1. Turn off the gas supply and allow the water heater to cool down.
2. Locate the pilot assembly and carefully remove the pilot tube from the gas valve.
3. Using a small brush or compressed air, gently clean the orifice to remove any accumulated debris.
4. Reassemble the components and relight the pilot according to the manufacturer’s instructions.

Checking For Drafts

Drafts can interfere with the proper functioning of your water heater’s pilot light, leading to recurrent extinguishing. Drafts are commonly caused by inadequate ventilation or improperly installed venting systems.

To detect and remedy drafts:

• Thoroughly inspect the area surrounding the water heater for any significant air currents that may be affecting the pilot light.
• Ensure that the water heater’s venting system is correctly installed and free from any obstructions or damage.
• Seal any gaps or cracks in the vicinity of the water heater to prevent the ingress of unwanted drafts.

Professional Help

Seeking professional help can resolve the issue of a new Rheem water heater’s pilot light frequently going out. Trust experts for a prompt and lasting solution to ensure your water heater functions efficiently and safely.

Professional Help If you find yourself in a situation where your new Rheem water heater’s pilot light keeps going out, it may be time to seek the assistance of a qualified professional. While some issues can be resolved through simple troubleshooting, more complex problems often require the expertise of a trained technician. Knowing when to call a technician and how to choose a qualified professional is crucial in ensuring that your water heater is properly repaired and maintained.

When To Call A Technician

If you have attempted basic troubleshooting steps and the pilot light continues to go out, it may indicate a more serious underlying issue. Additionally, if you notice any unusual smells, sounds, or leaks coming from your water heater, it’s essential to seek professional help promptly. Ignoring these signs could lead to more significant problems down the line.

Choosing A Qualified Professional

When selecting a technician to work on your water heater, be sure to look for a qualified professional with experience in servicing Rheem water heaters. It’s important to research and vet potential service providers, checking for proper licensing, certifications, and customer reviews. Choosing a qualified professional ensures that the issue will be correctly diagnosed and resolved, providing you with peace of mind and a properly functioning water heater. Remember, it’s best to address water heater problems promptly and enlist the help of a professional to avoid further complications.

Frequently Asked Questions On New Rheem Water Heater Pilot Light Keeps Going Out

Why Does My Brand New Water Heater Keep Going Out?

Brand new water heaters may keep going out due to faulty installation, gas supply issues, or sediment buildup. Regular maintenance and professional inspection can help resolve the problem.

Why Would The Pilot Light Go Out On A New Water Heater?

The pilot light on a new water heater may go out due to a few possible reasons. One common cause is a faulty thermocouple, which detects if the pilot light is on and shuts off the gas if it’s not.

Another reason could be a draft or lack of airflow. Lastly, a gas supply issue could also be responsible.

Why Does My Water Heater Pilot Light Keep Blowing Out?

The water heater pilot light may blow out due to dirty components, a faulty thermocouple, or a draft. Regular maintenance and cleaning can prevent this issue. Gas leaks or improper venting can also be the cause, requiring professional inspection and repair.

How Do You Fix A Pilot Light That Keeps Going Out?

To fix a pilot light that keeps going out, clean the pilot orifice and the surrounding area. Check for obstructions and use a small brush to remove any dirt or debris. Also, ensure that the gas supply is uninterrupted and the thermocouple is properly positioned and functioning.

Conclusion

To summarize, experiencing a pilot light repeatedly going out on your Rheem water heater can be frustrating. By understanding the possible causes and following the troubleshooting steps in this blog post, you can restore the proper functioning of your water heater.

Remember to check for gas supply issues, a faulty thermocouple, or a dirty pilot assembly. Regular maintenance and professional assistance can also help avoid future problems. Ensure the safety and efficiency of your water heater by addressing this issue promptly.